44 1670 001-GB-I
HDA eco
33
5.2.3 Entering the Odometer reading (optional)
A 1 to 8-digit odometer reading can be entered directly. A plausibility check can be
carried out if necessary (see dispensing options).
Display (e.g.):
For a downstream refuelling data evaluation the odometer reading must to be as-
signed to a vehicle, i.e. the vehicle must be queried!
5.2.4 Entering the order number (optional)
An alphanumerical value with a max of 8 digits can be entered.
Display (e.g.):
5.2.5 Refuelling
After all queried parameters have been entered, refuelling is requested.
Display (e.g.):
5.2.5.1 Entry of a preselected quantity
It is possible to enter a preselected quantity before drawing the nozzle. To this end
the desired quantity in litres is entered directly using the numeric keys. After having
pressed the first numerical key or
‘ENTER’
, the display changes and indicates the pre-
selected quantity.
Display (e.g.):
The preselection quantity is confirmed with ‘
ENTER
’; the entry of the preselection
quantity is cancelled with ‘
EXIT
’. After pressing
‘EXIT’
, a normal refuelling procedure
is initiated without using the preselected quantity.
Odometer:12000
Order: 56385265
Please refuel!
Volume: 0.00L
Preset: 120 L
To Next Page
Loading...