44 1670 001-GB-I
HDA eco
35
5.2.7.1 Data retrieval via USB flash drive
The dispensing and system data of the HDA eco are written to a USB flash drive. We
recommend using the supplied USB flash drive. It is possible to use other USB flash
drives but we cannot guarantee for their performance. The data on the USB flash
drive can be processed on a PC using the HD Manager refuelling data administration
program. To retrieve the data, the USB flash drive is inserted into the opening pro-
vided on the left of the automatic dispenser housing. Before doing so, the cover (if
any) must be swivelled away after loosening the knurled screw.
Optionally, in order to protect against access by unauthorised persons, an optional
preset USB code must be entered after inserting the USB flash drive (see section
5.3.3.2). By default the USB code requisition is not activated.
Display (e.g.):
The storage of the data takes place in a folder whose name is equal to the name of
the serial number of the device, e. g. 1820345. The dispense data of several devices
can be stored on one USB flash drive by this method.
To prevent the loss of data, the USB flash drive must not be removed during read-
ing or writing.
After completion of the data retrieval, the retrieved refuelling data are marked as
transmitted and are therefore ignored in the case of subsequent data retrievals. See
Annex B for further details, regarding the retrieved data and storage on the USB flash
drive.
After completion of the data retrieval, the cover must be replaced and the knurled
screw tightened.
5.2.7.2 Data retrieval via data cable
The connection of the appropriate accessory kit to a PC is necessary for data retrieval
via a data cable. The data are retrieved and processed via the ‘HD Manager refuelling
data administration program’ – refer also to the separate manual.
Storing
refuelling data
To Next Page
Loading...