TECALEMIT HDA eco - 5.3 Management Operating Mode; Main Menu; Refuelling Data Menu

36 44 1670 001-GB-I
HDA eco
5.3 Management operating mode / main menu
The operating mode is switched to management by entering a master code or by the
use of the master transponder.
Attention:
Master code factory setting: 99999. It is absolutely essential to change this code
(see section 5.3.3.2)
In this mode of operation system parameters can be set and various management
functions can be performed, such as administration of the dispensing data, totals, IDs
etc.
Display (e.g.):
Menu items are selected with the ▲’ ‘ and ‘▼ ‘ keys and selection is confirmed by
pressing the ‘
ENTER
’ key.
Sub-menus or menu items can be aborted by pressing the ‘
EXIT
’ key.
Pressing the ‘
EXIT
’ key in the main menu will return you to the dispensing mode.
5.3.1 Refuelling data menu
The functions for the display and processing of the dispensing data are combined in
this menu. The HDA eco automatic dispenser can store approx. 10,000 dispensing
data records. The oldest data records are overwritten once the memory is full.
Display (e.g.):
After selecting the appropriate menu item, the respective sub-menus can be used to
display or delete the dispensing data, to display the number of stored dispensing
events or to create a report on a USB flash drive.
Select with ‘
ENTER
’, abort with ‘
EXIT
’.
Main menu
▼Refuelling data
Refuelling data
▼Show Refuell.