44 44 1670 001-GB-I
HDA eco
5.3.3.2 Master ID
For secure access to the HDA management functions entering a master code with op-
tional master pin is necessary.
The factory presets are: master code ‘99999’.
Display (e.g.):
The ‘◄’ and ‘►’ keys can be used to switch between the code and the PIN entry. Press
‘
ENTER
’ to change the respective parameter and ‘
EXIT
’ to complete the entry.
Instead of a code, a transponder can be assigned to the master code. After pressing
the
‘ENTER’
-Key, the transponder tag must be held within a distance of 1 – 2” to the
reader.
Notice:
In case the master code/PIN was forgotten (or a master transponder was lost) no
more management functions are accessible. Please contact Tecalemit service for
help.
Master
To Next Page
Loading...