6 44 1670 001-GB-I
HDA eco
1 Safety instructions
This device was manufactured taking into account the relevant laws and directives for ensuring
security as well as the protection of the environment and health. Despite this, its use may result
in hazards for persons and material assets. Hence, it is essential that the instructions in this
manual are complied with.
Warning notices and symbols
In this operating manual, the following symbols are used to point out especially important in-
formation:
Specific details on the economic use of the device
.
Specific details and/or instructions for damage prevention
.
Details and/or instructions for preventing injury to persons or extensive material dam-
ages
Intended use
Use the device only when it is in perfect working condition and only for its intended purpose
while observing all safety precautions and risks. In particular, all malfunctions that could pose
a safety hazard are to be corrected immediately.
The device and its components are intended for use exclusively with the liquids listed and only
for the purpose described. Any other use or additional manner of usage is not intended.
Organizational measures
This operating manual is to be kept within easy reach at the place of operation. The nameplate
and the warning labels on the device must be observed and kept completely legible at all times.
Qualified personnel
The personnel for installation, commissioning, operation, and maintenance of the device must
possess the relevant and adequate qualifications for these tasks. The operator must ensure that
the contents of this manual are fully understood and implemented by the personnel.
Maintenance and repairs
Do not make any changes, extensions and/or modifications to the device without the manufac-
turer's permission. Replacement parts must conform to the technical specifications defined by
the manufacturer. For original parts, this conformity is always guaranteed.
Hazardous substances
In exceptional cases, the components of this device may contain hazardous substances. In ac-
cordance with the requirements of the European REACH regulation, we provide current infor-
mation on this on our homepage, in the download section.
Observe all safety regulations for the respective product when handling oils, greases, fuels and
other chemical substances!
Water protection
The device has been constructed for use with water contaminants. It is to be operated such that
bodies of water cannot be polluted by it. All applicable regulations at the place of operation are
to be complied with!
Hydraulics
Only personnel with special knowledge of and experience in hydraulics are allowed to perform
work of any type on hydraulic equipment. Depressurize the device before performing any work
on it. All pressure-bearing components are to be inspected regularly for leaks and damage.
To Next Page
Loading...