TECALEMIT HDA eco

To Next Page

To Previous Page

44 1670 001-GB-I

HDA eco

Electrical energy

Work on electrical equipment is only to be performed by qualified electricians. De-energize the

machine and system components before performing any work on the device.

The insulation on all live parts is to be inspected regularly for damage.

Main Page

Table of Contents3
Safety Instructions6
Technical Description8
2.1 Intended Use8
2.2 Description8
2.3 Versions8
2.4 Technical Data9
2.5 Interfaces of the HDA Eco9
Interface Flow Meter9
Interface Level Control11
Interface Nozzle Switch12
Interface Pump Motor13
2.6 Accessories14
Software Connection15
Mytecalemit Cloud15
Assembly Instructions16
3.1 Electric Connection16
Notes Concerning Electrical Connection20
Relay Contact20
Emergency Mode Switch20
Battery Exchange21
Socket Modem21
Float Switch21
Cable Shielding21
Installation of the Float Switch21
Installation of the Level Probe (Optional)21
Retrofitting the Level Probe Interface23
Connection of the RS232 / RS422 Interface23
RS232-Connection23
Printer Connection24
RS422-Connection25
LAN Connection25
WLAN Connection26
CMR-Connection27
Retrofitting the Data Interface27
3.2 Calibration of the Measuring System28
First Steps - HDA Eco29
Operating of the Fluid Inventory Control System HDA Eco30
5.1 Switching on30
Entry of Values30
5.2 Refuelling Mode30
Driver Identification (Optional)31
Vehicle Identification (Optional)31
Tank Content Display (Optional)32
Software Version Display32
Dispensing Without Entering a Code (Optional)32
Entering the Odometer Reading (Optional)33
Entering the Order Number (Optional)33
Refuelling33
Entry of a Preselected Quantity33
Refuelling Procedure34
Data Retrieval34
Data Retrieval Via USB Flash Drive35
Data Retrieval Via Data Cable35
5.3 Management Operating Mode / Main Menu36
Refuelling Data Menu36
Show Refuellings37
Print Refuellings (Option 'Printer')37
Reset Refuellings38
Of Refuellings38
USB Report - Refuellings39
Total Data Menu40
Display Totals40
Reset Totals40
USB Report - Totals41
Ident Codes Menu41
Code42
Pin42
Refuelling Limit42
Maximum Refuelling Time42
Odometer or Operating Hours Request42
Odometer or Operating Hours Range43
Odometer or Operating Hours Status43
Lock / Release ID43
Quota Dispense Quantity43
Quota Time Frame43
Master ID44
USB Report - Ids45
Web Update (Optional)46
Menu System46
Menu Refuelling Options46
Identification47
Odometer Y/N47
Previous Odometer Y/N47
Order Y/N48
Nozzle Switch Y/N48
Refuelling Limit48
Max. Refuelling Time48
Time out Refuelling48
Receipt (Option 'Printer')49
Menu Dispensing Point49
Product Number49
Pulses / Litres49
Post Decimals50
Automat Lock50
Device Address50
Max Zero Refuellings50
Menu Extended51
Menu Date / Time51
Contrast LCD52
Language52
Language from USB Flash Drive52
Initialisation / Restoring Factory Settings53
Info Configuration53
Activation53
Communication PIN53
Usb Pin54
Menu Interface for LAN Socket Modem Option54
Menu Interface for Wifi Socket Modem Option59
Menu Interface for CMR Socket Modem Option64
Transponder ID69
Menu Fuel Tank69
Stock Control70
Tank Parameter Menu (Option Level Probe)70
Form / Tank Shape70
Max. Volume / Maximum Tank Volume70
Height / Maximum Filling Height71
Density Medium71
Sensor Type71
Offset Sensor71
Min. Volume / Cut off Volume71
Zero Point Compensation Sensor72
Tank Level (Level Probe Option)72
Spare Parts73
6.1 Exchange of the Buffer Battery74
Type Plate and Warning Signs74
Trouble Shooting What to Do, if75
Disposal79
Return of Batteries79
Annex A. Menu Structure Management Operation80
Annex B. Functional Principle Hdmanager.net83
Annex C. Functional Principle Mytecalemit Cloud84
Annex D. Data Export or Import Via USB-Flash-Drive85

TECALEMIT HDA eco - Page 7

Table of Contents