SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
Page 9.25
9.4.2.2. Write to low kit
To write the values of the currently displayed parameters to the low kit, scroll using the +/- keys
until the display shows:
WRITE TO LOW KIT ?
press ENTER to write the new data to the low kit, and return to the upper menu level by pressing
CLEAR for a few seconds.
9.4.2.3. Machine usage data
The machine usage data on the display is updated every 10 minutes. This means that, whenever the
machine is switched off, any data modified after the last memory update will be lost.
MESSAGE ON DISPLAY DESCRIPTION
Life Brake: Minutes x 10 of operation of the brake
Life Kit H: Minutes x 10 of operation of the upper assembly
Life Kit L: Minutes x 10 of operation of the lower assembly
Tot. Km: Total km traveled
KJ Total KJ during exercise
By selecting one of the items in the above table it is possible to modify its content, but only after
having cleared its value. When the ENTER key is pressed the message "Reset life..." appears,
followed by the name of the selected item; pressing ENTER again resets the value of the selected
item, while pressing CLEAR reverts to the preceding value.
To Next Page
Loading...
