SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
Pagina 7.6
7.2.3. 700WTV VERSION (WELLNESS TV)
Figure 7.2-7
Carry out the operations described in
paragraphs: Errore. L'origine riferimento non
è stata trovata.“Errore. L'origine riferimento
non è stata trovata.”.
Then place the display on a work bench. It is
now possible to disassemble its circuit boards:
• The LCD inverter (A),
• The CPU Board (B).
And the circuit boards mounted on the rear
display support:
• Digital TV Board
• Input AUX Board
Figure 7.2-8
LCD inverter (A):
1. Back off the 2 screws (a) with a medium
Phillips screwdriver
Figure 7.2-9
2. Remove the covering plate (b) of the LCD
inverter.
3. Disconnect the connectors (c) [CN2 – CN3-
CN5].
4. Back off the 2 screws (d), which fix the
board to the display plate.
5. Remove the LCD inverter.
Continued on following page
→
To Next Page
Loading...
