SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
Page 2.15
ELT-01: Alternator cable
(Brake board – Alternator – Battery – Inlet for battery charging)
Brake board
CN3
Signal Colour Alternator Battery
Battery charging
inlet
1 V+ voltage from
alternator
Red Faston -
2 V- voltage from
alternator
Black Faston -
3 RPM signal White Faston
4 V+ voltage from
battery charger
Red - soldered to internal
contact
5 V- voltage from
battery charger
Black - soldered to external
contact
6 Battery V+ Red - Faston -
7 Battery V- Black - Faston -
ELT-02: Brake supply cable
(Brake board – Brake – Speed sensor – NTC)
Brake board
CN2
Signal Colour
Brake
Speed sensor NTC
1 Brake supply + Brown Faston - -
2 Brake supply - Blue Faston - -
3 SPM Grey -
Faston connected
to brown cable
-
4 SPM Reference Black - eyelet -
5 NTC + White - - 2
6 NTC - Brown - - 1
ELT-04: Power supply cable between upper and lower assemblies
(Brake board - Patch connector 1)
Brake board
CN1
Signal Colour
Patch connector
1
2 Gnd Blue 2
3 Gnd Red 3
4 - sensing +5 Vdc digital Black 4
6 +12 Vdc White 6
7 +5 Vdc Green 7
8 +sensing +5 Vdc digital Orange 8
To Next Page
Loading...
