4-223
LED display (when input and output is active):
R1 R2 R3
Note: Refer to section 4.3 for other monitor parameters 12-11~12-82.
Monitor parameters 12-67 (KWHr) and 12-68 (MWHr) is the display of accumulative energy.
Note: Parameter 11-54 can clear the monitor parameter.
Monitor parameter 12-76 (No-load voltage) is required to refer to the descriptons of parameter
02-09(Motor 1 excitation current) and 17-09 (Motor excitation current).
To Next Page
Loading...
