TECO F510 series - Page 311

4-222
12- 81 Relay Card Display (LED/LCD)
Range
Readable only (only for keypad）

Please refer to parameter group 24.
10-03=xxx1b
1 to 8 Relay card is installed.
24-00=1
24-07=0: Relay is ON and RUN.
Display sequency:
LED display (without output): LCD display:
0000 0000
Realy Card(R8)
Realy Card(R7)
Realy Card(R6)
Realy Card(R5)
Realy Card(R4)
Realy Card(R3)
Realy Card(R2)
Realy Card(R1)
0：OPE N
1：CLOSE
0000
LED display (when input and output is active):
R1 R2 R3 R4R5 R6
R7
R8
10-03=xxx1b
Control board Relay is installed.
24-00=1
24-07=1: Relay is ON and RUN.
Display sequence:
LED display (without output): LCD display:
0000 0000
Output Terminal(R3)
Output Terminal(R2)
Output Terminal(R1)
0：OPEN
1：CLOSE
0000