Teknim PARS Series - Page 71

TEKNİM PARS SERIES INTRUDER ALARM SYSTEM INSTALLATION AND PROGRAMMING MANUAL
70 / 81
• LCD Keypad;
[Fx] [6] → [Master Code] → [7-GSM Signal Level]→ [√ OK]
GSM Signal Level indicates as Percent.
GSM signal level percentages can be interpreted according to the following table.
GSM Signal Level
Status
%0
No GSM Signal
%1-%20
GSM Signal is Weak
%20 - %70
GSM Signal is OK
%70 - %100
GSM Signal is Very Good
!!! Important !!!
If the GSM Signal is below 20%, the system's call, SMS sending, and GPRS connections may be
unstable. In this case, a longer antenna may be need to installed in the GSM module or the alarm
panel may need to be installed in a more suitable location.