Section 2: Getting started 4200A-SCS Parameter Analyzer User's Manual
2-16 4200A-900-01 Rev. D/April 2020
For additional preamplifier details, see the Model 4200A-SCS Reference Manual.
Figure 11: Installing a preamplifier on the probe station
Powering the 4200A-SCS
Operating the instrument on an incorrect line voltage may cause damage, possibly voiding
the warranty.
The power cord supplied with the 4200A-SCS contains a separate protective earth (safety
ground) wire for use with grounded outlets. When proper connections are made, the
instrument chassis is connected to power-line ground through the ground wire in the power
cord. In the event of a failure, not using a properly grounded protective earth and grounded
outlet may result in personal injury or death due to electric shock.
Do not replace detachable mains supply cords with inadequately rated cords. Failure to use
properly rated cords may result in personal injury or death due to electric shock.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
