Tektronix Keithley 4200A-SCS - Search for and Select a Test

4200A-SCS Parameter Analyzer User's Manual Section 6: Make I-V measurements on a solar cell
4200A-900-01 Rev. D/April 2020 6-5
Search for and select a test
To search for and select the test:
1. Select Tests.
2. In the Filters pane, select Solar Cell.
Figure 76: Use filters to select the fwd-ivsweep test
3. Select the Solar Cell Forward I-V Sweep (fwd-ivsweep) test.
4. Select Add.
The test is displayed in the project tree.
Figure 77: Test added to the project tree
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com