4200A-SCS Parameter Analyzer User's Manual Section 3: Create a new project and test
4200A-900-01 Rev. D/April 2020 3-9
Execute the test
Select Run to execute the test.
Figure 25: Run
View and analyze the test results
While the test is running, you can view the data in the spreadsheet of the Analyze pane. Because you
created a new test, the data must be assigned to the axes of the graph before you can view graphical
results.
To view and analyze the test results:
1. Select Analyze. The Analyze screen displays data as it is gathered in the spreadsheet and a
blank graph with unassigned axes.
Figure 26: Analyze highlighted
2. Select Graph Settings.
3. Select Define Graph.
4. In the Graph Definition screen, assign X to DrainV and Y1 to DrainI.
Figure 27: Define the graph
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
