4200A-SCS Parameter Analyzer User's Manual Section 6: Make I-V measurements on a solar cell
4200A-900-01 Rev. D/April 2020 6-9
Run the test
1. Highlight the fwd-ivsweep test in the project tree.
2. Select Run to execute the test.
Figure 82: Run
Analyze the test results
You can select Analyze when you run the project to view test results in real-time.
Figure 83: Analyze highlighted
You can also use the View icons in the upper-right of the center pane to display the sheet, graph, or
sheet and graph. The sheet only view is shown in the next figure.
Figure 84: Sheet only view selected, View icons highlighted
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
