Tektronix MSO64 User Manual

Zooming on waveforms
Use the zoom tools to magnify waveforms to view signal details.
Turn on Zoom mode
Zoom mode lets you look at a portion of your waveform in greater detail. Enable Zoom mode and touch and drag on-screen to
select the area to zoom.
To enable Zoom mode, use one of the following methods:
1. Double-tap the Draw a Box button and select the Zoom button. Tap outside of the menu to close it.
Tap the Draw-a-Box button, then touch and drag in the Waveform view to draw a box on the area of interest. The Draw a
Box Zoom mode stays enabled so that you can draw boxes to zoom in different areas of the Zoom Overview, or draw boxes
to further zoom in on the same area.
2. Push the front-panel Zoom button.
3. Tap the Zoom icon in the corner of Waveform and Plot views.
MSO54, MSO56, MSO58, MSO58LP, MSO64 Help 131

Tektronix MSO64 Specifications

General

Brand	Tektronix
Model	MSO64
Category	Test Equipment
Language	English