Tektronix MSO64 User Manual

Other bus types. Other serial bus types, such as CAN, LIN, I2C, FlexRay, and so on, are available as purchasable options.
Once purchased and installed, the new bus types are shown in the Bus Type menu. The serial bus options also add
corresponding bus trigger capabilities to the Trigger menu.
ARINC 429 serial bus menu on page 192
Audio serial bus configuration menu on page 194
CAN serial bus configuration menu on page 196
FlexRay serial bus configuration menu on page 200
I2C serial bus configuration menu on page 202
LIN serial bus configuration menu on page 204
MIL-STD-1553 serial bus menu on page 205
Parallel Bus configuration menu on page 207
RS232 serial bus menu on page 209
SENT serial bus configuration menu on page 211
SPI serial bus configuration menu on page 213
SPMI serial bus configuration menu on page 215
USB serial bus configuration menu on page 217
See also.
Bus Trigger configuration on page 342
Bus Search configuration menus on page 230
FlexRay serial bus configuration menu
Use the Flexray bus menu (optional) to set up and display a Flexray automotive network serial bus waveform.
To set up the FlexRay serial bus:
■
To create a new FlexRay bus waveform, tap the Add New Bus button on the Settings bar. Open the bus configuration
menu by double clicking on the badge. Set the Bus Type to FlexRay.
■
To change the settings on an existing FlexRay serial bus waveform, double-tap the Bus waveform badge and make
necessary changes.
Menus and dialog boxes
200 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help

Tektronix MSO64 Specifications

General

Brand	Tektronix
Model	MSO64
Category	Test Equipment
Language	English