Tektronix MSO64 User Manual

Window Search configuration menu
Use the Window search to mark a waveform when the signal rises above an upper threshold level or falls below a lower
threshold level (the 'window'), with or without a time limit constraint.
To create a new window search:
1. Tap Add New... Search.
2. Set the Search Type to Window.
3. Select the search Source.
4. Use the menu fields to set the search parameters.
To change the settings on an existing search, double-tap the search badge and make necessary changes.
Menus and dialog boxes
262 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help

Tektronix MSO64 Specifications

General

Brand	Tektronix
Model	MSO64
Category	Test Equipment
Language	English