Tenda MX3 - Page 110

Document version: V1.0
100
Parameter
Description
ID
Specifies the ID of the Mesh node, which is automatically allocated.
Cloud Account
Specifies the account bound on your Tenda WiFi App.
MAC address filter
Overview
With this function, you can blacklist clients by MAC addresses to prohibit them from accessing the
internet through the Mesh device.
−
If you blacklist a wired client, the client will fail to access the network, but it can still connect to
the Mesh device.
−
If you blacklist a wireless device, the client will be kicked offline and cannot connect to the Mesh
device again.
To access the configuration page, log in to the web UI of the Mesh device, and choose More >
Advanced > MAC Address Filter.
The following table describes the parameters displayed on this page.
Parameter description
Parameter
Description
MAC Address Filter
Used to enable or disable the MAC address filter function.
Blacklist Device
Device Name
Specifies the name of the blacklisted client.
MAC Address
Specifies the MAC address of the blacklisted client.
Operation
: Used to remove a client from the blacklist.