Step 4
Select the configuration file (suffixed with cfg) to be restored, and click Open.
Wait until the ongoing process finishes, and previous settings are restored to the Mesh
device.
---End
Reset a node
−
Resetting clears all configurations and restores the Mesh device to factory settings. Please
operate with caution.
−
Resetting the primary node clears all customized configurations on the primary node. You can
configure the network again after resetting. If the Mesh devices in the same kit are in the
networking range, automatic networking will be performed after you configure the node as the
primary node again.
−
Resetting a secondary node clears all customized configurations on the secondary node. If the
secondary node is in the networking range of the primary node in the same kit, automatic
networking with the primary node will be performed after you reset the secondary node.
To reset a node:
Step 1
Log in to the web UI.
Step 2
Choose More > System Settings > Backup & Restore.
Step 3
Click Reset in the line of the node to be reset.
To Next Page
Loading...
