Configuration procedure:
Step 1
Set your Mesh device.
1.
Run the Tenda WiFi App, and choose Settings > Advanced > IPTV.
2.
Enable the STB function.
3.
Set Ethernet Port Selection as required.
This substep is required only for some models, such as MX15 Pro/EX15 Pro/Mesh15XP/MX21 Pro/EX21
Pro/Mesh21XEP.
4.
Tap Save.
Step 2
Configure the set-top box.
Use the IPTV user name and password to dial up on the set-top box.
---End
After the setting completes, you can watch IPTV programs on your TV.
To Next Page
Loading...
