Tenda MX3 - Page 231

Document version: V1.0
221
WAN port information
This part is displayed only in the router mode.
Tap WAN Port Info to view WAN port information of the primary node, as described in the
following table.
Parameter description
Parameter
Description
Internet Connection Status
Specifies the internet connection status of the WAN port.
Internet Connection Type
Specifies the internet connection type of the WAN port. PPPoE is used as an
example here.
Connected time
Specifies the internet connection time of the primary node.
IP Address
Specifies the WAN IP address of the primary node.
Subnet Mask
Specifies the WAN subnet mask of the primary node.
Default gateway
Specifies the gateway IP address of the primary node.
Primary DNS
Specify the IP address of primary and secondary DNS servers of the primary
node.
Secondary DNS
MAC Address
Specifies the WAN MAC address of the primary node.
LAN information
Tap LAN Info to view LAN information of the primary node, as described in the following table.
Parameter description
Parameter
Description
IP Address
Specifies the LAN IP address of the primary node, which is also the IP address
for logging in to the web UI of the primary node.
Subnet Mask
Specifies the LAN subnet mask of the primary node.
MAC Address
Specifies the LAN MAC address of the primary node.