Indicates the status of the Ethernet ports of the primary node.
Currently, this parameter is only available for Mesh15XP, MX15 Pro, EX15 Pro,
Mesh21XEP, MX21 Pro and EX21 Pro.
: Indicates that the port is connected and used as a WAN port.
: Indicates that the port is connected and used as a LAN port.
: Indicates that the port is connected and used as an IPTV port.
: Indicates that the port is not connected.
Shows the online clients that are connected to the primary node.
Shows the offline clients that are connected to the primary node before.
A maximum of 30 offline clients can be displayed here. A client will be automatically
deleted from the list if it is offline for 3 days. A client is displayed under Offline
Device after it is disconnected from the network for 90 seconds (wired client)/60
seconds (wireless client).
Used to reboot the primary node.
Used to turn on/off the LED indicator of the primary node.
You can use this function to check which device you are operating. Turn on/off all
indicators prevails to this operation.
To Next Page
Loading...
