Used to enable or disable the Unify 2.4 GHz & 5 GHz function.
When this function is enabled, the 2.4 GHz and 5 GHz Wi-Fi networks share the same
SSID and password. WiFi-enabled clients connected to it will use the frequency with
better connection quality. For details, see Separate the 2.4 GHz and 5 GHz Wi-Fi
networks.
Specifies the encryption mode supported by the Mesh device, including:
−
Not encrypted: Indicates that the Wi-Fi network is not encrypted and any
clients can access the network without a password. This option is not
recommended as it leads to low network security.
−
WPA2-PSK (Recommended): The network is encrypted with WPA2-PSK/AES.
−
WPA3-SAE/WPA2-PSK: The network is encrypted with both WPA3-SAE and
WPA2-PSK, improving both security and compatibility. This option is only
available for some models. Refer to the product you purchased.
WPA3-SAE is the upgraded version of WPA2-PSK. If your WiFi-enabled client does not
support WPA3-SAE, or you get poor WiFi experience, it is recommended to use
WPA2-PSK (Recommended).
Specifies the password for connecting to the Wi-Fi network. You are strongly
recommended to set a Wi-Fi password for security.
It is recommended to use the combination of numbers, uppercase letters, lowercase
letters and special symbols in the password to enhance the security of the Wi-Fi
network.
To Next Page
Loading...
