Tenda MX3 - Page 64

Document version: V1.0
54
Basic information
In this part, you can view basic information about the primary node, as described in the following
table.
Parameter description
Parameter
Description
Product Model
Specifies the model of the primary node.
System Time
Specifies the current system time.
Runtime
Specifies the network connection time of the primary node.
Firmware Version
Specifies the firmware version of the primary node.
Hardware Version
Specifies the hardware version of the primary node.
WAN port information
This part is displayed only in the router mode.
In this part, you can view WAN port information of the primary node, as described in the following
table.
Parameter description
Parameter
Description
Internet Connection Status
Specifies the internet connection status of the WAN port.
Internet Connection Type
Specifies the internet connection type of the WAN port. PPPoE is used as an
example here.
Connected time
Specifies the internet connection time of the primary node.
IP Address
Specifies the WAN IP address of the primary node.
Subnet Mask
Specifies the WAN subnet mask of the primary node.
Default gateway
Specifies the gateway IP address of the primary node.
Primary DNS
Specify the IP address of primary and secondary DNS servers of the primary
node.
Secondary DNS
MAC Address
Specifies the WAN MAC address of the primary node.