−
Assign static IP addresses to LAN clients.
The following table describes the parameters displayed on this page.
Parameter description
Specifies the LAN IP address of the Mesh device, which is also the
management IP address for logging in to the web UI of the Mesh device.
Specifies the subnet mask of the LAN port, used to identify the IP address
range of the local area network.
Used to enable or disable the DHCP server. Once enabled, the DHCP server
automatically assigns internet parameters such as IP address, subnet mask,
and gateway address to the terminal device. You are recommended to enable
this function.
Specifies the range of IP addresses that can be assigned to clients connected
to the Mesh device. The default range is 192.168.0.100 to 192.168.0.200.
To Next Page
Loading...
