Tenda TEG3224T User Manual

24-Port Managed Gigabit Switch
Target IP Filter
Specify the target IP filter for this specific ACE.
Any: No target IP filter is specified. (Target IP filter is
"don't-care".)
Host: T
arget IP filter is set to Host. Specify the target IP
address in the Target IP Address field that appears. Network:
Target IP filter is set to Network. Specify the target IP address
and target IP mask in the Target IP Address and Target IP Mask
fields that appear.
Target IP Address
When "Host" or "Network" is selected for the target IP filter, you
can enter a specific target IP address.
Target IP Mask
When "Network" is selected for the target IP filter, you can
enter a specific target IP mask.
ARP SMAC Match
Specify whether frames can hit the action according to their
sender hardware address field (SHA) settings.
0: ARP
frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SMAC address.
Any: Any value is allowed ("don't-care").
RARP SMAC Match
Specify whether frames can hit the action according to their
target hardware address field (THA) settings.
0: RARP
frames where THA is not equal to the SMAC address.
1: RARP frames where THA is equal to the SMAC address.
Any: Any value is allowed ("don't-care").
94

Tenda TEG3224T Specifications

General

Brand	Tenda
Model	TEG3224T
Category	Switch
Language	English