24-Port Managed Gigabit Switch
IP/Ethernet Length
Specify whether frames can hit the action according to their
ARP/RARP hardware address length (HLN) and protocol
address length (PLN) settings.
0: ARP/RARP
frames where the HLN is equal to Ethernet
(0x06) and the (PLN) is equal to IPv4 (0x04) must not match
this entry.
1: ARP/RARP
frames where the HLN is equal to Ethernet
(0x06) and the (PLN) is equal to IPv4 (0x04) must match this
entry.
Any:
Any value is allowed ("don't-care").
IP
Specify whether frames can hit the action according to their
ARP/RARP hardware address space (HRD) settings.
0: ARP/RAR
P frames where the HLD is equal to Ethernet (1)
must not match this entry.
1: ARP/RAR
P frames where the HLD is equal to Ethernet (1)
must match this entry.
Any:
Any value is allowed ("don't-care").
Ethernet
Specify whether frames can hit the action according to their
ARP/RARP protocol address space (PRO) settings.
0: ARP/RARP
frames where the PRO is equal to IP (0x800)
must not match this entry.
1: ARP/RARP
frames where the PRO is equal to IP (0x800)
must match this entry.
Any: Any value is allowed ("don't-care").
95
To Next Page
Loading...
