Tenda TEG3224T User Manual

24-Port Managed Gigabit Switch
non-zero: IPv4 frames with a Time-to-Live field greater than
zero must be able to match this entry.
Any: Any value is allowed ("don't-care").
IP Fragment
Specify the fragment offset settings for this ACE. This involves
the settings for the More Fragments (MF) bit and the Fragment
Offset (FRAG OFFSET) field for an IPv4 frame.
No
: IPv4 frames where the MF bit is set or the FRAG OFFSET
field is greater than zero must not be able to match this entry.
Yes
: IPv4 frames where the MF bit is set or the FRAG
OFFSET field is greater than zero must be able to match this
entry.
Any
: Any value is allowed ("don't-care").
IP Option
Specify the options flag setting for this ACE.
No
: IPv4 frames where the options flag is set must not be able
to match this entry.
Yes
: IPv4 frames where the options flag is set must be able to
match this entry.
Any: Any value is allowed ("don't-care").
SIP Filter
Specify the source IP filter for this ACE.
Any
: No source IP filter is specified. (Source IP filter is
"don't-care".)
Host
: Source IP filter is set to Host. Specify the source IP
address in the SIP Address field that appears.
97

Tenda TEG3224T Specifications

General

Brand	Tenda
Model	TEG3224T
Category	Switch
Language	English