24-Port Managed Gigabit Switch
Network: Source IP filter is set to Network. Specify the source
IP address and source IP mask in the SIP Address and SIP
Mask fields that appear.
SIP Address
When "Host" or "Network" is selected for the source IP filter,
you can enter a specific SIP address in dotted decimal
notation.
SIP Mask
When "Network" is selected for the source IP filter, you can
enter a specific SIP mask in dotted decimal notation.
DIP Filter
Specify the destination IP filter for this ACE.
Any
: No destination IP filter is specified. (Destination IP filter is
"don't-care".)
Host: Destination IP filter is set to Host. Specify the destination
IP address in the DIP Address field that appears.
Network
: Destination IP filter is set to Network. Specify the
destination IP address and destination IP mask in the DIP
Address and DIP Mask fields that appear.
DIP Address
When "Host" or "Network" is selected for the destination IP filter,
you can enter a specific DIP address in dotted decimal
notation.
DIP Mask
When "Network" is selected for the destination IP filter, you can
enter a specific DIP mask in dotted decimal notation.
ICMP Parameters
98
To Next Page
Loading...
