Tenda TEG3224T - Page 116

24-Port Managed Gigabit Switch
allowed string content is NVT ASCII character set (32 - 126)
except for spaces.
SNMP Trap Configuration
Trap Mode
Indicates the SNMP trap mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.
Disabled: Disable SNMP trap mode operation.
T
rap Version
Indicates the SNMP trap supported version. Possible versions are:
SNMP V1: Set SNMP trap supported version 1.
SNMP V2c: Set SNMP trap supported version 2c.
T
rap Community
Indicates the community access string when send SNMP trap
packet. The allowed string length is 0 to 255. The allowed
string co
ntent is NVT ASCII character set (32 - 126) except for
spaces.
Trap Authentication Failure
Indicates the SNMP entity is permitted to generate
authentication failure traps. Possible modes are:
Enabled: Enable SNMP trap authentication failure.
Disabled: Disable SNMP trap authentication failure.
T
rap Destination
Indicates the SNMP trap destination state. Possible modes are:
None: No trap destination.
Specific: Set specific SNMP trap destination address.
T
rap Destination Address
Indicates the SNMP trap destination address.
109