24-Port Managed Gigabit Switch
QCEs. Each QCE can be used to classify certain frames to a
specific QoS class. This classification can be based on parameters
such as VLAN ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority.
Frames not matching any of the QCEs are classified to the default
QoS class for the port.
Number of Classes:
Configure the number of traffic classes as "1", "2", or "4". The
default value is "4".
Default Class Configuration
Port
The logical port for the settings contained in the same row.
Default Class
Configure the default QoS class for the port, that is, the QoS
class for frames not matching any of the QCEs in the QCL.
QCL #
Select which QCL to use for the port.
User Priority
Select the default user priority for this port when adding a Tag
to the untagged frames.
Queuing Mode
Select which Queuing mode for this port.
Queue Weighted
Setting Queue weighted (Low: Normal: Medium: High) if the
"Queuing Mode" is "Weighted".
67
To Next Page
Loading...
Need help?
General
