24-Port Managed Gigabit Switch
Rate Limiter
Specify the rate limiter in number of base units. The allowed
range is 1 to 15. Disabled indicates that the rate limiter
operation is disabled.
Port Copy
Frames that hit the ACE are copied to the port number
specified here. The allowed range is the same as the switch
port number range. Disabled indicates that the port copy
oper
ation is disabled.
Logging
Specify the logging operation of the ACE. The allowed values
are:
Enabled: F
rames matching the ACE are stored in the System
Log.
Disabled: Frames matching the ACE are not logged.
Please note that the System Log memory size and logging rate
is limited.
Shutdown
Specify the port shut down operation of the ACE. The allowed
values are:
Enabled: If a frame matches
the ACE, the ingress port will be
disabled.
Disabled: Port shut do
wn is disabled for the ACE.
Counter
The counter indicates the number of times the ACE was hit by
a frame.
MAC Parameters
90
To Next Page
Loading...
