INTRODUCTION
1A-2
7. Do not return material to your Jacobsen dealer or
distributor without a letter of explanation. Make a
list of all returned parts, show your name and
address, and include the letter and list with the
shipment. TRANSPORTATION CHARGES MUST
BE PREPAID.
SPECIFICATIONS
Product Information
67923 ........................................... Super LF-1880 2WD
67924 ........................................... Super LF-1880 4WD
67938 ................................. Super LF 1800 Turbo 4WD
An identification plate, like the one shown, listing the
serial number, is attached to the frame of the tractor
near the center lift arm mount (Figure 1A-2).
Always provide the serial number of the unit when
ordering replacement parts or requesting service infor-
mation.
Figure 1A-1. Serial Plate
Kubota D1105-E Engine
Make .................................................................. Kubota
Model ...............................................................D1105 E
Horsepower...................... 26 hp (19.4 kW) @3000 rpm
NOTE:
Actual sustained horsepower will likely be lower
than listed in specifications due to operating limi-
tations and environmental factors.
Displacement ................................68.5 cu. In (1123 cc)
Torque ...........................54 ft-lbs. (73 Nm) @ 2200 rpm
Fuel:
Type ......................................................No. 2 Diesel
Rating........................................... Cetane Rating-45
Capacity .............................12 U.S. Gal. (45.4 liters)
High-speed - rpm ......................................3150 no load
Low idle - rpm............................................1750 no load
Lubrication:
Capacity ......................................... 5.4 qt (5.1 liters)
Type ......................................................SAE 10W30
API Classification ................................ Liquid cooled
Air Filter..........................Dry type with service indicator
Alternator........................................................... 40 amp
Cooling system........................................ Liquid Cooled
Kubota D1105-TE Engine
Make .................................................................. Kubota
Model ............................................................ D1105 TE
Horsepower...................... 33 hp (24.6 kW) @3000 rpm
NOTE:
Actual sustained horsepower will likely be lower
than listed in specifications due to operating limi-
tations and environmental factors.
Displacement ................................68.5 cu. In (1123 cc)
Torque ...........................60 ft-lbs. (81 Nm) @ 2200 rpm
Fuel:
Type ......................................................No. 2 Diesel
Rating........................................... Cetane Rating-45
Capacity .............................12 U.S. Gal. (45.4 liters)
High-speed - rpm 3150 no load
Low idle - rpm 1750 no load
Lubrication:
Capacity ......................................... 5.4 qt (5.1 liters)
Type ......................................................SAE 10W30
API Classification ......................................... CD, CE
Air Filter......................... Dry type with service indicator
Alternator........................................................... 40 amp
Cooling system........................................ Liquid Cooled
Cutting Units
Reel................................5 Reels, 18 in. (457 mm) wide
Reel Diameter ........................................ 5 in. (127 mm)
Blade Options..........................................8 or 11 blades
Cutting Height ................. 0.30 to 0.70 in (7.6 to 18mm)
Cutting Width....................................... 80 in (2032 mm)
Cutting Frequency:
8 Blade........................ 0.067 in/mph (1.06 mm/kph)
11 Blade ...................... 0.049 in/mph (0.77 mm/kph)
Product
EEC
Sound
Power
Sound
Pressure
Level
Operator Ear
Vibration M/S
2
Arms Body
67923 <105 dba 88.05 dba 3.7 0.11
67924 <105 dba 88.05 dba 3.7 0.11
CHARLOTTE, NC
YEAR OF
PRODUCTION:
MADE IN U.S.A.
®
A Textron Company
To Next Page
Loading...
Need help?
General
