EasyManuals Logo

Thermo King SPECTRUM TS Series User Manual

Thermo King SPECTRUM TS Series
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
SPECTRUM™ TS Operation
70
Selecting Sleep Mode
Normal Cycle Sentry mode starts and stops the
unit as required to maintain the desired
temperature in all zones, maintain the unit battery
in a charged condition and keep the unit engine
warm in cold ambient conditions. Sleep mode
does not maintain zone temperatures – it only
keeps the engine warm and the unit battery
charged. This is useful in extremely cold weather
or when the unit is to be out of service for an
extended time.
Sleep mode operates in both Diesel mode and
Electric mode. In Diesel mode the unit will start
and stop as required to maintain engine
temperature and battery charge. In Electric mode
the unit starts and stops as necessary to maintain
battery charge only.
When Sleep mode is entered, the operator can
program an automatic Wake-up Time up to a
week away. Using this feature, the unit will
automatically restart and run normally at the
determined time. If a Wake-up Time is
programmed the operator can also program an
automatic Pretrip Test when the unit restarts.
Sleep Mode is turned On and Off using the Mode
Menu. From the Standard Display, press the
MENU key.
Figure 81: Standard Display
The Language Menu or Alarm Menu will appear.
Press the NEXT key as required to show the
Mode Menu. When the Mode Menu is shown
press the SELECT key.
Figure 82: Mode Display
Press the Next key as required to display the Sleep
Mode prompt.
Figure 83: Start Sleep Mode
Press the Select key to choose the Sleep Mode
menu.
Figure 84: Program Wake-Up Time
The operator can now choose a Sleep Mode
Wake-up Time or simply enter Sleep Mode
immediately. If NO is pressed the unit will
immediately enter Sleep Mode
The display will show SLEEP and the unit will
start and stop as required to keep engine warm
and/or the battery charged. Sleep mode does not
maintain zone temperatures. To exit Sleep Mode
press the EXIT key or turn the unit off and back
on. The unit will resume normal operation and
control to setpoint.
Figure 85: Sleep
CAUTION: The engine may start
automatically any time the unit is turned
on.
AJA1154
AJA1133
AJA1259
AJA1260
AJA1261

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thermo King SPECTRUM TS Series and is the answer not in the manual?

Thermo King SPECTRUM TS Series Specifications

General IconGeneral
BrandThermo King
ModelSPECTRUM TS Series
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals