Applied Instructions
Function & Action
即使使用 X000=OFF 停止执行 TZCP 指令时，
仍然保持 X000 变为 OFF 以前的状态。
M0~M2
Compare the two assigned time with time data
z Comp 3 clock data start from with the two ends on the clock compare bound,
accord e area bound, output the three ON/OFF status starts from
are the
ing to th
S·
D·
, ＋1， ＋2 : Assign the compare low limit in the form of “Hour”, “Minute” and “Second”.
, ＋1， ＋2 : Assign the compare low limit in the form of “Hour”, “Minute” and “Second”.
, ＋1， ＋2 : Assign the clock data in the form of “Hour”, “Minute” and “Second”.
ices output ON/OFF.
, ＋1， ＋2 : According to the compare result, the 3 dev
S1·
S1·
S1·
S2·
S2·
S2·
S·
S·
S·
D·
D·
The valid range of “Hour” is「0~23」.
lid range of “Minute” is「0~59」.
id range of “Second” is「0~59」.
[TZCP]
16 bits instruction：DIV 32 bits instruction：DDIV
Suitable Models：
XC3、XC5
Word
Device
Bit
Device
D
FD
DM
DX
DY
DS
TD
CD
K/H
S1·
S2·
S3·
X Y M S T C Dn.m
D·
The status of the destin devices is ke
t
even if the TCMP instruction is deactivated. ation
D·
The va
The val
201
To Next Page
Loading...
Need help?
General
