10. STARTING UP EXTERNAL LINK AND SETTINGS
61
5. Select a Wireless LAN access point and press
[Connect]. <Wireless Properties> is displayed.
6. Set necessary security settings for the Wireless
LAN connection.
7. Press [OK] to finish settings and return to the
screen in step 5.
8. Press [OK] to return to the screen in step 4.
PROCEDURE Necessary settings for Bluetooth communication
1. Start up External Link.
" PROCEDURE Necessary settings for
Wireless LAN communication (when
communicating DS and the external device
directly)" step1 to 3
2. Press [Bluetooth] in <SETTING>. Set
communication conditions for the data collector
used.
Items set and options (*: Factory setting)
(1) Bluetooth : Enable*/Disable
(2) REC Type : REC-A (newly measured
data is output)/REC-B
(displayed data is output)*
(3) Terminate
: ETX*/ETX+CR/ETX+CR+LF
"9.1 Wireless Communication using
Bluetooth Technology Terminate"
To Next Page
