To Next Page

To Previous Page

Chapter 8 – Communication Trace Example

165

Sent:(U5000270000900Red Dye REDDYE

02710000000000000000000000000000000000000000000000000000000000000260000000000000000000000

00000000000000000000000) Received: (000)

Sent:(U5000280000500Winter Additive WINADD

02810000000000000000000000000000000000000000000000000000000000000270000000000000000000000

00000000000000000000000) Received: (000)

Modbus:

For each recipe:

Fn=0x06, Write Recipe Index to Register 2200

Fn=0x16, Write Recipe Data to Registers 2201 … 2267

(both writes can be done at the same time with one Fn=0x16 command)

8.1.3 UPDATE PRESET DEFINITIONS

Sent:(U400000BLENDER

02002100000000000000000002202302400000000000000000000000000000000000000002002102202302400

0000000000000000000000000000000000000000000000000000000000000000000000000000000000)

Received: (000)

Sent:(U400001BLENDER

02002100000000000000000002202300000000000000000000000000000000000000000002002102202300000

0000000000000000000000000000000000000000000000000000000000000000000000000000000000)

Received: (000)

Sent:(U400002LSD

02000000000000000000000002200000000000000000000000000000000000000000000002002200000000000

0000000000000000000000000000000000000000000000000000000000000000000000000000000000)

Received: (000)

Sent:(U400003HSD

02500000000000000000000000000000000000000000000000000000000000000000000002500000000000000

0000000000000000000000000000000000000000000000000000000000000000000000000000000000)

Received: (000)

Sent:(U400004KEROSENE

02600000000000000000000002700000000000000000000000000000000000000000000002602702800000000

0000000000000000000000000000000000000000000000000000000000000000000000000000000000)

Received: (000)

Modbus:

Fn=0x16, Write Preset Data to Registers 8000 … 8066

Fn=0x16, Write Preset Data to Registers 8067 … 8133

Fn=0x16, Write Preset Data to Registers 8134 … 8200

Fn=0x16, Write Preset Data to Registers 8201 … 8267

Fn=0x16, Write Preset Data to Registers 8268 … 8334

8.1.4 STATUS QUERY

Periodically query the status of MultiLoad by issuing the following command.

This command also provides indication to MultiLoad that the host is still up.

Sent:(Q) Received: (0000038)

From the Q response, when needed send the following commands:

power_up bit is set

Modbus:

Fn=0x03, Read Register 7000

Brand	Toptech
Model	MultiLoad II
Category	Control Systems
Language	English

Toptech MultiLoad II User Manual

Table of Contents

Questions and Answers:

Toptech MultiLoad II Specifications

Related product manuals