Toptech MultiLoad II - Transaction Archive Registers

Chapter 7 – Register Operations
13
2
7.1.17 800 – TRANSACTION ARCHIVE REGISTERS
R005 => 0?0BBBBB
Where:
BBBBB = BOL Transaction Number of Current or Last Transaction completed.
Modbus: Read Only Register=48, Len=1, 16-Bit Integer
R800BBBBII => 0?0800BBBBII…
(or)
R800BBBBIIII => 0?0800BBBBIIII…
Where:
BBBB = BOL Transaction Number
Note: For Modbus, the Modbus Transaction Number Index Register sets the BBBB index.
Modbus: Read/Write Register=7800, Len=1, 16-Bit Integer (BBBB)
II (or) IIII = BOL Detail Line Index
Note: For Modbus, the Modbus Transaction Detail Index Register sets the IIII index.
Modbus: Read/Write Register=7801, Len=1, 16-Bit Integer (IIII)
… = Type Specific Parameters
if BOL Detail Line Index = 00,
IIBBBBnnnn(10)oosssspppptttteeaaaa(25)bbbb(25)cccc(25)dddd(25)eeee(25)
(or)
IIIIBBBBnnnn(10)oosssspppptttteeaaaa(25)bbbb(25)cccc(25)dddd(25) eeee(25)
II (or) IIII = BOL Detail Line Index
BBBB = BOL Transaction Number
nnnn = Card Number (10 Characters)
oo = Company Number
ssss = Load Start Time
pppp = Load Stop Time
tttt = Load Date
ee = Number of Details in Transaction
aaaa = Driver Prompt #1 Value (25 Characters)
bbbb = Driver Prompt #2 Value (25 Characters)
cccc = Driver Prompt #3 Value (25 Characters)
dddd = Driver Prompt #4 Value (25 Characters)
eeee = Driver Prompt #5 Value (25 Characters)
Modbus:
Read/Write Register=7810, Len=2, 32-Bit Integer (nnnn)
Read/Write Register=7812, Len=1, 16-Bit Integer (oo)
Read/Write Register=7813, Len=1, 16-Bit Integer (ssss)
Read/Write Register=7814, Len=1, 16-Bit Integer (pppp)
Read/Write Register=7815, Len=1, 16-Bit Integer (tttt)
Read/Write Register=7816, Len=1, 16-Bit Integer (ee)
Read/Write Register=7817, Len=25, Characters (aaaa)