Toro Groundsmaster 3320-D - Page 356

AssemblingtheFrontAxleShaftsandBearings(continued)
g225895
Figure208
5.Applya1.60mm(1/16inch)beadofLoctiteUltraGraySilicone(gasket
eliminator)totheaxlehousingange.Alignthedustshieldandbrake
assemblywiththeaxlehousingangeandpushtheaxleshaftassemblyall
thewayintotheaxlehousing.Ensurethatyoudonotdamagetheoilseal
andbearing(Figure208).
Note:Liquidgasketkit(T oroPartNo.92-8775)includesLoctiteultragray
silicone(gasketeliminator)andapplicationinstructions.
g225896
Figure209
6.Installthe4socket-headscrews,4hardenedwashers,and4locknuts.
Tightenthenutsevenlyinanalternatingpatternsothatthebearingisdrawn
intotheaxlehousing(Figure209).Torquethenutsto22to27N·m(16
to20ft-lb).
IMPORTANT
Whentighteningthelocknuts,holdthesocket-headscrewswitha
wrenchtopreventthescrewheadfromdamagingtheaxletube.
DriveAxles:ServiceandRepairs
Page8–14
Groundsmaster
®
3280-D/3320
05138SLRevB