Toro Groundsmaster 4300-D - Setup - Part 3; Installing the Hood Latch (CE Compliance)

MaintenanceandService(continued)
batterycableandthenthepositivecable.Disconnecttheenginewire
harnessfromtheengineECU.Also,disconnectthewireharnessconnector
fromthemachinecontrolleranddisconnecttheterminalconnectorfromthe
alternator,attachtheweldergroundcablenotmorethan610mm(2ft)from
theweldinglocation.
•Atthetimeofmanufacture,themachineconformedtothesafetystandards
forridingmowers.Toensuretheoptimumperformanceandcontinued
safetycerticationofthemachine,usegenuineT ororeplacementpartsand
accessories.Thereplacementpartsandaccessoriesofothermanufacturers
canresultinnon-conformancewiththesafetystandardsandcanvoidthe
warranty.
Groundsmaster
®
4300-D
Page1–5
Safety:SafetyInstructions
16226SLRevC