Toro Groundsmaster 4300-D - Specifications; Cutting Deck

Specications
CuttingDeck
g186523
Figure225
Mounting:Allthecuttingdecksaresupportedbyindependentliftarmsand
areinterchangeabletoanycuttingdeckpositions.TheGroundsmaster4300-D
machineuses5cuttingdecks.
Construction:Thedeckchamberandframeareweldedsteelconstruction
reinforcedwiththechannelsandplates.
Height-of-cutrange:19to101mm(0.75to4inches)adjustablein6.4mm
(0.5inch)increments.Theheight-of-cutadjustmentismadebyrepositioning
thedeckonthedeckframe.
Deckdrive:Theclosedloop,integratedrelief,andhydraulicsystemoperates
thecuttingdeckhydraulicmotors.Thebladespindlesare31.7mm(1-1/4inch)
shaftssupportedbythegreaseable,taperedrollerbearingsinaductileiron
housing.
Cuttingblade:Eachcuttingdeckequippedwitha559mm(22inches)length,
6.4mm(0.250inch)thick,heattreated,steelblade.Anti-scalpcupisinstalledon
thecuttingblade.Thestandardbladeisoptimizedformostcuttingapplications.
Optionalhighlift,angledsail,andatomicbladesareavailableforthosesituations
wherethestandardbladeisnotideal.
Discharge:Theclippingsaredischargedfromtherearofthemowingdecks.
Pre-drilledmountingholesinthecuttingdeckallowattachmentofoptional
mulchingbafe.
Cuttingdecklift:ThecuttingdecksontheGroundsmaster4300-Dmachines
arecontrolledwiththeoperatorjoystick.
Suspensionsystem:Afullyoatingsuspensionwithhydrauliccounterbalance.
Maincenterpivotallowsside-to-sidedeckoscillation.Individualdeckssupported
with2frontrollersand1fullwidth,rearroller.
Weight:Individualcuttingdeckweighsapproximately63.5kg(140lb).
CuttingDeck:Specications
Page7–2
Groundsmaster
®
4300-D
16226SLRevC