Toro Groundsmaster 4300-D - GPM Hydraulic Tester (Pressure and Flow)

15GPMHydraulicTesterKit(PressureandFlow)(continued)
3.PressureGauge:Aglycerinelledpressuregauge0to34,500kPa(0to
5,000psi)toprovideoperatingcircuitpressure.
4.FlowMeter:Thismetermeasurestheactualuidowintheoperatingcircuit
withagaugeratedat5to55L/minute(1to15gallons/minute).
5.OutletHose:Ahosefromtheoutletsideofthehydraulictesterthatconnects
tothehydraulicsystemcircuit.
6.Fittings:Anassortmentofhydraulicttingsareincludedwiththiskit.
40GPMHydraulicTester(PressureandFlow)
g035151
Figure41
ToroPartNo.AT40002
Usethistestertotestthehydrauliccircuitsandcomponentsforowandpressure
capacitiesasrecommendedinT estingtheHydraulicSystem(page4–44).This
testerincludesthefollowing:
1.LoadValve:Turnthevalvetorestricttheowtocreateasimulatedworking
loadinthecircuit.
2.PressureGauge:Aglycerinelledpressuregauge0to35,000kPa(0to
5,000psi)toprovideoperatingcircuitpressure.
3.FlowMeter:Thismetermeasurestheactualuidowintheoperatingcircuit
withagaugeratedat20to150L/minute(4to40gallons/minute).
Note:Thistesterdoesnotincludethehoses;refertoHydraulicHoseKit(page
4–33).
HydraulicSystem:SpecialTools
Page4–32
Groundsmaster
®
4300-D
16226SLRevC