Toro Groundsmaster 4300-D - Page 330

RemovingtheWheel
1.Parkthemachineonalevelsurface,lowerthecuttingdecks,shutoffthe
engine,settheparkingbrake,andremovethekeyfromthekeyswitch.
2.Blockthewheelsthatarenotremovedwithchockstopreventthemachine
frommoving.
3.Loosen,butdonotremovethe5wheel-lugnutsthatattachthewheelto
themachine.
IMPORTANT
Beforeliftingthemachinewithajack,reviewandfollowJacking
Instructions(page1–6).
4.Liftthemachinewithajackuntilthewheeltoberemovedisofftheground.
Supportthemachinewithappropriatejackstands.
5.Removethe5wheel-lugnutsthatattachthewheeltothemachine,and
removethewheel.
InstallingtheWheel
1.Installthewheeltothemachinewiththe5wheel-lugnuts.
2.Lowerthemachinetotheground.
WARNING
Failuretomaintainpropertorquecouldresultinfailureorlossof
wheelandmayresultinpersonalinjury.
Maintainthepropertorqueofthewheel-lugnuts.
3.Torquethewheel-lugnutsevenlyto95to122N∙m(70to90ft-lb)ina
crossingpattern.
4.Checkandadjustthetirepressures;refertoSpecications(page6–2).
Chassis:ServiceandRepairs
Page6–6
Groundsmaster
®
4300-D
16226SLRevC