Toro Reelmaster 5100-D - Input Test: Rear Backlap Control

REELMASTER® 223-D, 5100-D, and 5300-D Maintenance Schedule
Minimum Recommended Maintenance Intervals:
Maintenance Procedure Maintenance Interval & Service
Every
Every
Every
Every
800hrs
Check Battery Fluid Level Every
400hrs
200hrs
100hrs
Check Battery Cable Connections
50hrs
Lubricate All Grease Fittings
Change Engine Oil A Level
Inspect Air Filter, Dust Cup, and Baffle
Service
† Check Fan and Altenator Belt Tension
‡ Replace Engine Oil Filter B Level
Inspect Cooling System Hoses
Service
Drain Moisture-Hyd. Tank
Drain Moisture-Fuel Tank
Check Reel Bearing Preload Adjustment
C
† Torque Wheel Lug Nuts
Level
Service Air Filter
Replace Electric Fuel Pump Filter
Replace Fuel/WaterSeparator Filter
Inspect Traction Linkage Movement
‡ Torque Head and Adjust Valves D
‡ Check Engine RPM (idle and full throttle)
Level
Change Hydraulic Fluid
Change Transmission Fluid
† Replace Transmission Filter
Check Rear Wheel Toe-in
Rear Axle Service
- pack Rear Wheel Bearings (2WD) E Level
- change Rear Axle Lubricant (4WD)
Service
† Initial break in at 10 hours
‡ Initial break in at 50 hours
Replace Moving Hoses
Replace Safety Switches
Annual Recommendations:
Items listed are recommended every 1600
Coolant System - Flush/Replace Fluid
hours or 2 years whichever occurs first.
Fuel Tank - Drain/Flush
Hydraulic Tank - Drain/Flush
(See Operator's and Service Manual for specifications and procedures)