Toro Reelmaster 5100-D - Output Test: Front Wing Lift;Lower Signal

_________________________________________________________________________________________
_____________ ________________ ______ ________________ ______ ________________ __________________________________ ______________________________
_____________ ________________ ______ ________________ ______ ________________ __________________________________ ______________________________
_____________ ________________ ______ ________________ ______ ________________ __________________________________ ______________________________
__
__ __ __ __ __ __ ___
__ __ __ __ __ __ ___
__ __ __ __ __ __ ___
Electrical System
Item Standard Specification Repair Limit Service Limit
Starter
Type Solenoid shift type
Nominal Output 1.6 kW - 12V
Direction of Rotation Clockwi
se as viewed from pinion side
No-load Characteristics (Cold)
Terminal Voltage 11.5V
Current 100A or less
Speed 3000 rpm or more
Load Characteristics
Terminal Voltage 7.7 V 11.5V
Current (torque) 300A (0.98 kg/m (6.7
ft-lb) or more) 0.7 kg/m (5 ft-lb)
Speed 980 rpm o
r more
Height of Brush 17 mm (0.67 in.) 6 mm (0.24 in.)
Spring Pressure 3 kg (6.6 lb.)
Commutator O.D. 38.7 mm (1.52 in.) – 1.0 mm (– 0.4 in.)
Depth of Commutator Undercut 0.5 mm (0.02 in.) 0.2 mm (0.008 in.)
Pinion Gap 0.5 - 2.0 mm (0.02 - 0.08 in.)
Thrust Gap 0.5 (0.02 in.) or less
Alternator
N
ominal Output 12V - 40A
Direction of Rotation Clockwise as view
ed from pulley side
Output Characteristics - Hot
Terminal Voltage 13.5V
Current / Speed 21A / 2500 rpm
37A/5000 rpm
Regulated Voltage 14.7 ± 0.3V
Glow Plugs
R
ated Voltage 10.5V DC
Rated Current (when rated voltage
is applied for 30 seconds) 9.7A ± 1.0A
R
esistance 0.16 ohm (at room temperature)
Glow Plug I
ndicator
Rated Current 29A
Voltage Across Terminals (at 29A) 1.7V ± 0.2V
Reelmaster
®
223-D/5100-D Page 3 - 9 Specifications