Toro Reelmaster 5100-D - Special Tools

Special Tools
NOTE: Special tools may be ordered from: Some tools may bebe listed in the Reelmaster 5100-D
Owatonna Tool Co. Parts Catalog or sold under Toro Model Numbers. Some
2013 4th Street, NW tools may also be available from a local supplier.
Owatonna, MN 55060
Digital Multimeter
The meter can test electrical components and circuits
for current, resistance, or voltage drop.
NOTE: Toro recommends the use of a DIGITAL mutli-
meter when testing electrical circuits. The high imped-
ance (internal resistance) of a digital meter will ensure
that excess current is not allowed through the meter.
Excess current can cause damage to a circuit that is not
designed to carry it.
Figure 1
Inductive Ammeter (AC/DC Current Transducer – Hall Effect)
Use this tool, connected to a Digital multimeter for doing
current draw tests. This tool can be useful when check-
ing glow plug and starter circuits.
Skin-Over Grease
Special non-conductive grease which forms a light pro-
tective skin to help waterproof electrical switches and
contacts (Fig. 2).
Toro P/N
505–47
8 oz. (.24 L) can
Figure 2
Reelmaster
®
5100-D Page 5 - 5
Rev. B
Special Tools