Toro Reelmaster 5100-D - Inspecting Reservoir Parts

Inspecting Reservoir Parts
1. Clean filler screen, suction screen and reservoir with
clean solvent (Fig. 103).
2. Inspect reservoir for leaks, cracks or other damage.
3. Replace hoses
or fittings if worn or leaking.
4. Replace breather with new part.
6
7
1
5
3
2
4
8
9
10
Tighten mounting cap-
screws to a torque of 30
to 60 in-lb.
Figure 103
1. Filler screen 6. Cap
2. Suction strainer 7. Dipstick
3. Reservoir 8. Grommet (3)
4. Drain plug 9. Washer (3)
5. Breather 10. Capscrew (3)
Mowing Circuit Repairs Page 4 - 68
Rev. A
Reelmaster
®
5100-D