Toro Reelmaster 5100-D - Default Chapter; Specifications

Specifications
Height of Cut:
5 Blade: 1/2 to 3/4 in.
8 Blade: 1/4 to 5/8 in.
Roller Adjustment:
Fr
ont: Fixed
Rear: Screw adjustable with bolt clamp lock
Bedknife To Reel Adjustment: Bedknife adjusts
against reel, with opposed screw adjustment on each
end of bedbar.
Bedknife Screw Torque: 200
in-lb.
Reel Splined Drive Nut Torque: 4
0 to 60 ft-lb.
Reel Bearing Rolling Torque: 4 to 7 in-lb with no
end play.
Figure 1
Specifications Page 8 - 2 Reelmaster
®
223-D/5100-D/5300-D